English
 |
| Quantity: | |
|---|---|
CPLFP—JW2460--01
Clouds Power
8506500000
24V60Ah Lithium Iron Phosphate Replacement for Lead Acid Battery UL2271 UL2489
Features:
1.The weight of the battery is only half that of lead-acid batteries of the same type.
2. It can safely discharge to 100% DOD (discharge depth), providing twice the energy.
3. The battery is manufactured using automotive grade batteries, with the highest safety standards and a longer cycle life.
4. Relying on intelligent software, advanced BMS (Battery Management System) provides comprehensive protection for batteries.
Our LiFePO4 lead acid replacement battery advantages
1.Cycle life time over 2000+80%DOD.
2.Wide working temperature range (-10~+45℃).
3.There is no need for frequent maintenance, because its performance is very stable, and it only needs regular inspection and testing in daily life.
4.Anti water IP54
5.Protocal: CAN/RS485
6.Have CE certificate for battery cell.
Parameter
Model | 24V 60Ah Lithium battery |
Housing | IP54 |
Size | L350*W300*H160 |
Charging cut-off voltage (V) | 29.2V |
Maximum charging current (A) | 60 |
| Storage temperature（@SOC50%） | -20℃~45℃/one month |
| Charging temperature | 0℃~45℃ |
| Discharing temperature | -10℃~45℃ |
Weight | Approx 15KGS |
Warranty | 1 years |
Cycle life（@80%DOD） | 1500+ |
Notes:
1. Charging current:
The charging current shall not exceed the maximum charging current specified in this standard. Charging with a current higher than the recommended value may cause the charge and discharge of the battery cell
Performance, mechanical performance and safety performance problems, and may cause heat generation or leakage.
2. Charging voltage:
The charging voltage must not exceed the charging cut-off voltage specified in this standard, and the design of the charger should meet this condition. The battery pack voltage is higher than the charging cut-off
When the cut-off voltage value is lower, it may cause problems in the charging and discharging performance, mechanical performance and safety performance of the battery pack, and may cause heat generation or leakage.
3. Charging temperature:
The battery pack is charged within the ambient temperature range of -25°C~45°C.
4. Prohibition of Reverse Charging:
Correctly connect the positive and negative poles of the battery, and reverse charging is strictly prohibited. If the positive and negative poles of the battery are reversed, the battery cannot be charged. At the same time, reverse charging will reduce
Low battery charge and discharge performance, safety, and cause heat generation and leakage.
